[ProductDetail_TopEspot]
[PDP_FEATUREDIN_Espot]
[ProductDetail_BLOG_TOUT_ESPOT]
[ProductDetail_KEEP_EXPLORING_ESPOT_Bottom]
18
10
0
true
false
false
false
false
pdp
{"scheme":"product1_cr"}
false
pdp
{"scheme":"product2_cr"}
[ProductDetail_Espot01]
[ProductDetail_Espot02]
45" Aluminum Extension Pole for Bar-height Tables is rated
out of
5 by
10.
Rated 2 out of
5
by
Janetty from
Not the right fitting
Needed an extension for an Umbrella I bought on another site so it would work with my counter height patio table. Unfortunately when I received it, the pole was missing a tapered end with “male” button...it just had 2 female holes...my upper pole had the hole and I needed the button on the lower. Wish description would have had more detail & pictures so I would have known this prior to purchasing. Sure, I could send it back but it would cost me almost as much as I bought it for. Trying to find another solution to this fit problem but having NO luck!
Date published: 2019-08-05
Rated 5 out of
5
by
melissa15 from
Exactly What I Needed!
I recently purchased a new umbrella but it did not fit into my existing bar height pole base and the one it came with was for a standard table. Not wanting to return my beautiful new umbrella I found this extension pole and it was a perfect match! So glad I found this. It was a perfect fit and the bronze color was spot on. FYI my umbrella was the piece with the button and was 1 1/2" wide. It fit perfectly into this extension pole with the hole for the button.
Date published: 2019-06-19
Rated 4 out of
5
by
Doctorjim205 from
Perfect height and color match.
Purchased two of these for use with bronze-framed umbrellas over bar-height tables on our deck. Height and color match were perfect. The locking hole where the pop out button attaches the umbrella’s upper section to the pole was a little too small for the button on the patio umbrella we purchased so the umbrella would spin with the wind gusts. I drilled it out to 7/16” and all is perfect now. Check your current hole size as you order so you can be prepared to widen the hole to match if your current hole is greater than 3/8” diameter.
Date published: 2018-08-21
Rated 1 out of
5
by
Nancy S from
Does not fit 1 1/2 poles
We were so disappointed that the extender pole did not fit our umbrella. The specs say it will fit up to a 1 1/2 inch pole. It should clarify that it will fit anything less than 1 1/2 inch.
Date published: 2018-08-14
Rated 5 out of
5
by
Jeannette14 from
Works Perfectly
The lower pole was delivered as scheduled for my patio umbrella and fits the umbrella and the base exactly as I had hoped. It raises the height of the umbrella about 6 inches and is just right with the pub table I’m using it on.
Date published: 2018-07-17
Rated 1 out of
5
by
estherharris from
poor design
like the other person said before this was made incorrectly, This is an Extension Pole for the Umbrella you purchase to ADD height. The extension cannot connect to the bottom pole because it is not tapered or made wider to accept the bottom pole. This is only 4 inches taller than the pole i already have, so switching out the pole does nothing either. I have to return it, unless Front gate wants to send a retrofit kit.
Date published: 2017-08-03
Rated 1 out of
5
by
MidwestMama from
Not a good fit
We ordered this as an extension pole for our bar-height patio set. The only problem is this is not tapered at the end with a button like it should be. The end of this pole looks exactly like the end of our umbrella pole - same diameter, hole for a button to snap into - so we have two female ends that do not fit together at all. This is very disappointing because the length and color are a perfect match.
Date published: 2017-07-08
Rated 5 out of
5
by
red1939 from
Perfect!
We received a Treasure Garden umbrella as a gift, but have a bar sized outdoor table set so the umbrella didn't fit tightly into the base. I checked with Treasure Garden first and didn't see that they had a product like this available. When I saw this extension pole on Frontgate, I had to try it. It fits perfectly on that umbrella. No more worries - it fits tightly in the base now.
Date published: 2014-05-22
How fare from the top of the pole is the hole for the push pin?
Thank you for your interest in the 45" Aluminum Extension Pole for Bar-height Tables. The holes for the push pins are 45"H from the top of the pole.
Date published: 2020-04-27
Can you provide the exact specifications and some pictures of the actual product and not just the color?
Thank you for your interest in the 45" Aluminum Extension Pole for Bar Height Tables. The image shown is an up-close picture of the actual extension pole. We apologize; we do not have any alternate images on file. However, the finish options will coordinate with our Market Umbrella frame finishes. This item is designed to make a standard height umbrella tall enough to use on a bar height table, measures 45"H, and accepts umbrella poles up to 1-1/2" dia.
Date published: 2020-03-17
Do umbrella extension bars have the little hole/circle a few inches that you pop in the little metal button into it for security to attach? I am saying that one that is not the "screw" type with threads. I need one that is longer than the table height.
Thank you for your interest in the 45" Aluminum Extension Pole for Bar-height Tables. This item snaps into the frame with a button.
Date published: 2020-02-04
I PURCHASED 2 OF YOUR 11' ROUND MARKET UMBRELLAS AND 1 8' x 11" RECTANGLE MARKET UMBRELLAS WILL THIS 45" EXTENSION FIT THESE UMBRELLAS?
Thank you for your interest in the 45" Aluminum Extension Pole for Bar-height Tables. The extension pole can be used with your 11' Round and 8' x 11' Market Umbrellas.
Date published: 2019-09-10
Will I be able to insert my 1 1/2" umbrella pole (I have the piece with the umbrella with the button on it) into this extension pole?
Thank you for your interest in the 45" Aluminum Extension Pole for Bar-height Tables. This pole will work with your 1-1/2" dia. umbrella pole. This item snaps into the frame with a button.
Date published: 2019-07-10
I am confused by the reviews on this product. I have an 11' market umbrella that we want to extend to make the pole longer/umbrella higher. The umbrella base is in the baja ledge of our pool. Will this extender fit with the 11' market umbrella?
Thank you for your interest in the 45" Aluminum Extension Pole for Bar Height Tables. This item is designed to make a standard height umbrella tall enough to use on a bar height table.
Date published: 2018-07-20
Is this threaded or hole for push button
Thank you for your interest in the 45" Aluminum Extension Pole for Bar-height Tables. This item snaps into the frame with a button.
Date published: 2019-07-14
Will this fit the Market umbrella?
Thank you for your interest in the 42" Extension Pole. This is made to add height to the umbrella not to fix a broken pole.
Date published: 2018-06-28
Product:43241-45\" Aluminum Extension Pole for Bar-height Tables