[ProductDetail_TopEspot]
[PDP_FEATUREDIN_Espot]
[ProductDetail_BLOG_TOUT_ESPOT]
[ProductDetail_KEEP_EXPLORING_ESPOT_Bottom]
18
10
0
true
false
false
false
false
pdp
{"scheme":"product1_cr"}
false
pdp
{"scheme":"product2_cr"}
[ProductDetail_Espot01]
[ProductDetail_Espot02]
Classic Copper Fire Pit is rated
out of
5 by
79.
Rated 5 out of
5
by
Maria T M from
A warm glow
The copper was beautiful by itself and with a few logs was even prettier. Made our new patio warm and inviting.
Date published: 2020-05-18
Rated 5 out of
5
by
Robyn Petty from
Fabulous Fire Pit
This is our second fire pit, we had our other one for over 10 years with tons of fires. It just wore out finally. And we could not go without another one. Absolutely love it.
Date published: 2020-05-14
Rated 5 out of
5
by
Alfisti76 from
Great purchase
Neat fit (also bought Frontgate firepit), material has a quality feel to it. Very happy with the result.
Date published: 2020-05-14
Rated 5 out of
5
by
Anonymous from
Beautiful fire pit.
This is a nice sized fire pit. It actually fits descent size logs. It has small holes at the bottom. It is actually very nice looking.
Date published: 2020-05-10
Rated 5 out of
5
by
Matilde from
Its a cover that actually fits and works.
This cover fits the 40 inch fire pit perfectly. The fit is snug but there are zippers on two sides.
Date published: 2020-05-10
Rated 5 out of
5
by
MaryHIL from
Love my fire pit!!
This fire pit is great! Ours is about 5 years old and we still get compliments. It has held up very well even in the wide range of weather we recieve in the upper midwest. Keep hoping Frontgate will make a cover (maybe copper) so we can use it as coffee table by day. I'd buy it again in a heartbeat!!!!
Date published: 2020-05-05
Rated 5 out of
5
by
happy fireman from
Great firepit!
It came with a slight dent in the edge but its barely noticeable. It's a great firepit so far (1 month in, used it 4-5 times) and we've received many compliments on it.
Date published: 2020-05-03
Rated 1 out of
5
by
rjohnson2 from
Poor quality
Disappointed in this item. The matching firepit was fine.
The welds are absolutely abysmal, and the grinding is visible through the paint.
The handle looks like it was a piece of scrap metal that was bent into shape.
Every single one of the holes drilled for the screws are wallowed out and off center.
The screws themselves look like they are scrap as well.
No bolts are included, instead the holes are tapped but because the drilled holes are of such poor quality the screws just slide right out.
The clips that hold the spark guard in place don't attach to the fire pit, so it is not very secure.
Lots of overspray on the (presumably) high temp paint.
Date published: 2020-04-28
Where is this fire pit made??
Thank you for your interest in our Classic Copper Fire Pit. This item is made in India.
Date published: 2020-05-27
Can a replacement grate be purchased for the 40" copper fire pit?
Thank you for your interest Frontgate. Please contact our Product Specialist Department at 800-537-8484 for further assistance with replacement parts.
Date published: 2020-05-19
We have this fire pit and are considering getting the spark cover. Will that help with the smoke the fire pits out as well as the sparks?
Thank you for your interest in the Classic Copper Fire Pit. The 34'' Safety Sparkguard (160112) is designed to prevent sparks and embers from escaping. It will not control the flow of the smoke.
Date published: 2020-05-19
Can rust oleum high heat paint be used to restore the copper firepit and/or base? And what's the best to restore the finish? I've heard everything from lemon juice to vinegars. Plz advise. Is it possible to get a new grate for the copper fire pit?
Thank you for your interest in the Classic Copper Fire Pit. For part and detailed care information, please contact our Product Specialists at 1-800-537-8484 and they can assist you.
Date published: 2020-05-14
What is the circumference of the firepit this cover fits. No dimensions were given.
Thank you for your interest in the Vinyl Cover for Fire Pit/Sparkguard. The width of this cover is 42".
Date published: 2020-05-11
Hello C/S, Many years ago, I purchased a 36" Steel Bowl Firepit from your company. Today, I am looking for a copper bowl replacement. Any ideas?
Thank you for your interest in the Classic Copper Fire Pit. For part information, please contact our Product Specialists at 1-800-537-8484 and they can assist you.
Date published: 2020-05-04
Is the cover machine washable?
Thank you for your interest in the Vinyl Cover for Fire Pit/Sparkguard (cover only). This cover is not machine-washable; it should be spot-cleaned.
Date published: 2020-04-30
Can we grill hot dogs or s’mores on it ?
Thank you for your interest in the Classic Copper Fire Pit. We are looking into this information for you and will update you as soon as possible.
Date published: 2020-04-27
Product:160113-Classic Copper Fire Pit
Related Products
